Quantitative analysis of microstructure evolution, stress partitioning and thermodynamics in the dynamic transformation of Fe-14Ni alloy

Li, L.*; Miyamoto, Goro*; Zhang, Y.*; Li, M.*; Morooka, Satoshi; Oikawa, Katsunari*; Tomota, Yo*; Furuhara, Tadashi*

Journal of Materials Science & Technology, 184, p.221 - 234, 2024/06

https://doi.org/10.1016/j.jmst.2023.10.037

Validation of the hybrid turbulence model in detailed thermal-hydraulic analysis code SPIRAL for fuel assembly using sodium experiments data of 37-pin bundles

Yoshikawa, Ryuji; Imai, Yasutomo*; Kikuchi, Norihiro; Tanaka, Masaaki; Ohshima, Hiroyuki

Nuclear Technology, 210(5), p.814 - 835, 2024/05

https://doi.org/10.1080/00295450.2023.2249707

In the study of safety enhancement on advanced sodium-cooled fast reactor, it is essential to clarify the thermal-hydraulics under various operation conditions in a fuel assembly (FA) with the wire-wrapped fuel pins to assess the structural integrity of the fuel pin. A finite element thermal-hydraulics analysis code named SPIRAL has been developed to analyze the detailed thermal-hydraulics phenomena in a FA. In this study, the numerical simulations of the 37-pin bundle sodium experiments at different Re number conditions, including a transitional condition between laminar and turbulent flows and turbulent flow conditions, were performed to validate the hybrid turbulence model equipped in SPIRAL. The temperature distributions predicted by SPIRAL was consistent with those measured in the experiments. Through the validation study, the applicability of the hybrid turbulence model in SPIRAL to thermal-hydraulic evaluation of sodium-cooled FA in the wide range of Re number was confirmed.

Development of methodology combining chemical analysis technology with informatics technology to understand perspectives property of debris and tie-up style human resource development (Contract research); FY2022 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Fukushima University*

JAEA-Review 2023-024, 109 Pages, 2024/03

JAEA-Review-2023-024.pdf:5.42MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2022. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2019, this report summarizes the research results of the "Development of methodology combining chemical analysis technology with informatics technology to understand perspectives property of debris and tie-up style human resource development" conducted in FY2022. The present study aims to goal of this study is to implement a research plan relate to a development of combinational technology of new chemical analysis with informatics, and the aim is to develop new system for whole image estimation system using small quantities of information.

Development of an RPV cooling system for HTGRs

Takamatsu, Kuniyoshi

Kakushinteki Reikyaku Gijutsu; Mekanizumu Kara Soshi, Shisutemu Kaihatsu Made, p.179 - 183, 2024/01

The HTGR has excellent safety, and even in the event of an accident where the reactor coolant is lost, the decay heat and residual heat in the core can be dissipated from the outer surface of the RPV, so the fuel temperature never exceeds the limit value, and the core stabilizes. On the other hand, regarding the cooling system that transports the heat emitted from the RPV to the final heat sink, an active cooling system using forced circulation of water by a pump, etc., and a passive cooling system using natural circulation of the atmosphere have been proposed. However, there is a problem that the cooling performance is affected by the operation of dynamic equipment and weather conditions. This paper presents an overview of a new cooling system concept using radiative cooling, which has been proposed to solve the above problem, and introduces the results of analysis and experiments aimed at confirming the feasibility of this concept.

Neutron flux estimation and neutronics characteristics calculation in post-JMTR conceptual study

Oizumi, Akito; Akie, Hiroshi

JAEA-Technology 2023-017, 93 Pages, 2023/12

JAEA-Technology-2023-017.pdf:8.45MB

After the decision of decommissioning JMTR (Japan Materials Testing Reactor), Japan Atomic Energy Agency investigated the possibility to construct a new irradiation test reactor to succeed JMTR (post-JMTR), and the final report of the investigated result was submitted to the Ministry of Education, Culture, Sports, Science and Technology on March 30th 2021. This investigation was carried out in 4 steps of (1) selection of reactor type, (2) reactor core plans studies, (3) neutronic studies, (4) thermal studies, and was finally (5) considered and evaluated. This JAEA-Technology report summarizes the process and the results of (3) neutronic studies. Neutron fluxes were calculated at irradiation sample positions in the investigated cores, the standard core and the compact core, and the calculated fluxes satisfied the required irradiation capability. It was also evaluated the two investigated cores' continuous reactor operation time in days in one refueling cycle, and the results guaranteed an operation days equality with that of existing JMTR. In addition, neutronic characteristics of the cores were estimated, such as power distribution in the core, control rod reactivity worth, reactivity coefficients, distribution of fuel burnup rate of each fuel element, and kinetics parameters. The evaluated neutronic characteristics were used in the post-JMTR final investigation report to confirm the neutronic feasibility by comparing with the neutronic limiting values of existing JMTR, and to estimate the cooling capability to make the core thermally feasible.

Nuclear data as foundation of nuclear research and development

Fukahori, Tokio; Nakayama, Shinsuke; Katabuchi, Tatsuya*; Shigyo, Nobuhiro*

Nihon Genshiryoku Gakkai-Shi ATOMO, 65(12), p.726 - 727, 2023/12

https://doi.org/10.3327/jaesjb.65.12_726

The Investigative Committee on Nuclear Data investigates and observes global trends in nuclear research and development and conducts comprehensive examinations of Japanese nuclear data activities from a broader perspective, as well as cooperation with domestic and foreign academic institutions in a wide range of fields other than the Atomic Energy Society. We aim to establish a system for communication, information exchange, and interdisciplinary cooperation. In this report, we will report on three of the main activities for the 2021-2022 term: a request list site for nuclear data, human resource development, and roadmap production.

Data report of ROSA/LSTF experiment TR-LF-15; Accident management actions during station blackout transient with pump seal LOCA

Takeda, Takeshi

JAEA-Data/Code 2023-012, 75 Pages, 2023/10

JAEA-Data-Code-2023-012.pdf:4.45MB

An experiment denoted as TR-LF-15 was conducted on June 11, 2014 using the Large Scale Test Facility (LSTF) in the Rig of Safety Assessment-V (ROSA-V) Program. The ROSA/LSTF experiment TR-LF-15 simulated accident management (AM) actions during a station blackout transient with TMLB' scenario with pump seal loss-of-coolant accident (LOCA) in a pressurized water reactor (PWR). This scenario is featured by loss of auxiliary feedwater functions. The pump seal LOCA was simulated by a 0.1% cold leg break. The test assumptions included total failure of both high pressure injection system and low pressure injection system of emergency core cooling system (ECCS). Also, it was presumed non-condensable gas (nitrogen gas) inflow to the primary system from accumulator (ACC) tanks of ECCS. When steam generator (SG) secondary-side collapsed liquid level dropped to a certain low liquid level, the primary pressure turned to rise. After the SG secondary-side became voided, the safety valve of a pressurizer cyclically opened which led to loss of primary coolant. Core uncovery thus took place owing to core boil-off at high pressure. When an increase of 10 K was confirmed in cladding surface temperature of simulated fuel rods, SG secondary-side depressurization was started as the first AM action. At that time, the safety valves in both SGs were fully opened. Primary depressurization was initiated by completely opening the pressurizer safety valve as the second AM action with some delay after the first AM action onset. When the SG secondary-side pressure lowered to 1.0 MPa following the first AM action, water was injected into the secondary-side of both SGs via feedwater lines with low-head pumps as the third AM action. A reduction in the primary pressure was accelerated because the heat removal from the SG secondary-side system resumed shortly after the third AM action initiation.

Molecular dynamics analysis of reactor graphite for preparing thermal neutron scattering law

Okita, Shoichiro; Goto, Minoru

Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 10 Pages, 2023/10

Verification of probabilistic fracture mechanics analysis code PASCAL for reactor pressure vessel

Lu, K.; Takamizawa, Hisashi; Li, Y.; Masaki, Koichi*; Takagoshi, Daiki*; Nagai, Masaki*; Nannichi, Takashi*; Murakami, Kenta*; Kanto, Yasuhiro*; Yashirodai, Kenji*; et al.

Mechanical Engineering Journal (Internet), 10(4), p.22-00484_1 - 22-00484_13, 2023/08

https://doi.org/10.1299/mej.22-00484

Investigation of the core neutronics analysis conditions for evaluation of burn-up nuclear characteristics of the next-generation fast reactors

Takino, Kazuo; Oki, Shigeo

JAEA-Data/Code 2023-003, 26 Pages, 2023/05

JAEA-Data-Code-2023-003.pdf:1.66MB

Since next-generation fast reactors aim to achieve a higher core discharge burn-up than conventional reactors do, core neutronics design methods must be refined. Therefore, a suitable analysis condition is required for the analysis of burn-up nuclear characteristics to accomplish sufficient estimation accuracy while maintaining a low computational cost. We investigated the effect of the analysis conditions on the accuracy of estimation of the burn-up nuclear characteristics of next-generation fast reactors in terms of neutron energy groups, neutron transport theory, and spatial mesh. This study treated the following burn-up nuclear characteristics: criticality, burn-up reactivity, control rod worth, breeding ratio, assembly-wise power distribution, maximum linear heat rate, sodium void reactivity, and Doppler coefficient for the equilibrium operation cycle. As a result, it was found that the following conditions were the most suitable: 18-energy-group structure, 6 spatial meshes per assembly with diffusion approximation. Additionally, these conditions should apply to correction factors for energy group structure, spatial mesh and transport effects.